Sea Ray 270 Amberjack Merced CA

The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

Lake Mc Clure-Lake Mc Swain
(209) 378-2521
9090 Lake Mcclure Rd
Snelling, CA
Services
Lake Mc Clure-Lake Mc Swain

Data Provided by:
International Inboard Marine
(209) 384-2566
2556 W 16Th St
Merced, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Malibu Boats West Inc
(209) 383-7469
1 Malibu Court
Merced, CA
 
Fine Line Industries
(209) 384-0255
455 Grogan Avenue
Merced, CA
 
M B Sports
(209) 357-4153
280 Airpark Road
Atwater, CA
 
McClure Point Marina
(209) 378-2441
3100 Barrett Cove Rd
Snelling, CA
Services
McClure Point Marina

Data Provided by:
Stor-All Mr
(209) 722-8631
2785 North Santa Fe Avenue
Merced, CA
 
Ferriera Racing
(209) 384-9284
819 West 16th Street
Merced, CA
 
Merced Power Sports
(209)722-8055Q
265 West 15th Street
Merced, CA
 
Tahoe Sports Fishing
(530) 541-5448
900 Ski Run Blvd # 102
South Lake Tahoe, CA
Manufacturers
Tahoe Sports Fishing

Data Provided by:
Data Provided by:

Sea Ray 270 Amberjack

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

Construction
Sea Ray uses a vinylester resin in a 2 oz. layer of chop to prevent osmotic blistering and for its superior strength and impact resistance. Chop and woven roving constitute the laminate and 3mm Coremat is used where bulkheads meet the hull skin to spread out point loads. Foam-cored fiberglass stringers, a pressure-treated wood transom, and exterior-plywood bulkheads support the hull and deck structure. The hull-to-deck joint is bonded with Bostic polyester putty and fastened with self-tapping screws every 6 in. The deck is laminated with chop strand mat wet out with a DCPD resin. A combination of Coremat and end-grain-balsa is used in the deck as coring for added stiffness. Sea Ray takes pains to prevent balsa penetrations.

Hull Design
The Sea Ray 270 Amberjack has a modified-vee, hard-chine planing hull with 21o of deadrise at the transom. Chine flats add form stability at rest and along with the hull's running strakes, add dynamic lift at speed.

Walkthrough
Cockpit and Topside
Aft at the transom area is a full-beam swimplatform with a handrail and integral ski tow eye, along with a 4-step boarding ladder""a long ladder like this is more expensive for the builder, but it makes boarding from the water much easier than a shorter, 3-step ladder would. There's also a storage trunk built into the transom, with plenty of room for lines and fenders as well as the shore power cable and freshwater hookup. Sea Ray put the time and money into providing two pairs of 8-in. stern cleats, which add a lot of mooring versatility and makes it a lot easier to get a fair lead with the stern lines out of the passengers' way. ...

Click here to read the rest of the article at JDPower.com