Sea Ray 270 Amberjack Madera CA

The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Semper Speed & Marine
(559) 436-1888
10854 North Highway 41
Madera, CA
 
Bohner Lacefield Marine
(559) 431-0336
10740 Hwy 41
Madera, CA
Services
New Boat Sales, Used Boat Sales, Engine Repair, Boat Storage
Hours
M-F 830am-530pm; Sat 820am-330pm Sunday - closed

Central Valley Auto Sales
(559) 822-2200
41453 Avenue 14 1/2
Madera, CA
 
Pacific Marine Center
(559) 432-2277
10452 N. Hwy. 41
Madera, CA
 
R J Sales
(559) 674-2142
6306 Road 26 1/2
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Fresno Marine & Performance
(559) 822-2288
14718 Highway 41
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Canvas West
(559) 447-9935
10204 Highway 41
Madera, CA
Services
Parts, Aftermarket Accessories, Supplies, Storage

Rays Small Engine & Marine
(559) 661-4480
500 N E St
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Canvas Shop
(559) 439-6660
10724 Highway 41
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Data Provided by:

Sea Ray 270 Amberjack

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

Construction
Sea Ray uses a vinylester resin in a 2 oz. layer of chop to prevent osmotic blistering and for its superior strength and impact resistance. Chop and woven roving constitute the laminate and 3mm Coremat is used where bulkheads meet the hull skin to spread out point loads. Foam-cored fiberglass stringers, a pressure-treated wood transom, and exterior-plywood bulkheads support the hull and deck structure. The hull-to-deck joint is bonded with Bostic polyester putty and fastened with self-tapping screws every 6 in. The deck is laminated with chop strand mat wet out with a DCPD resin. A combination of Coremat and end-grain-balsa is used in the deck as coring for added stiffness. Sea Ray takes pains to prevent balsa penetrations.

Hull Design
The Sea Ray 270 Amberjack has a modified-vee, hard-chine planing hull with 21o of deadrise at the transom. Chine flats add form stability at rest and along with the hull's running strakes, add dynamic lift at speed.

Walkthrough
Cockpit and Topside
Aft at the transom area is a full-beam swimplatform with a handrail and integral ski tow eye, along with a 4-step boarding ladder""a long ladder like this is more expensive for the builder, but it makes boarding from the water much easier than a shorter, 3-step ladder would. There's also a storage trunk built into the transom, with plenty of room for lines and fenders as well as the shore power cable and freshwater hookup. Sea Ray put the time and money into providing two pairs of 8-in. stern cleats, which add a lot of mooring versatility and makes it a lot easier to get a fair lead with the stern lines out of the passengers' way. ...

Click here to read the rest of the article at JDPower.com