Sea Ray 270 Amberjack Fresno CA

The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

A 1 Boat & Jet Ski
(559) 323-9016
2901 E Alluvial Ave
Clovis, CA
Services
A 1 Boat & Jet Ski

Data Provided by:
Belmont Marine
(559) 237-2597
2006 W Belmont Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Action Auto Towing
(559) 498-9999
2822 East California Avenue
Fresno, CA
 
Clawson Motorsports
(559) 435-5020
6334 North Blackstone Avenue
Fresno, CA
 
Ron'S Marine
(559) 292-6370
2782 N Sunnyside Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Hypercycles Of Fresno
(559) 233-1290
1505 N Blackstone Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Local Photo ADS
(559) 225-2704
1610 East Gettysburg Avenue
Fresno, CA
 
Fresno Boats
(559) 495-1455
9075 S Fruit Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bohner Boat & Marine
(559) 431-0336
10740 W North Ave # 41
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Data Provided by:

Sea Ray 270 Amberjack

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

Construction
Sea Ray uses a vinylester resin in a 2 oz. layer of chop to prevent osmotic blistering and for its superior strength and impact resistance. Chop and woven roving constitute the laminate and 3mm Coremat is used where bulkheads meet the hull skin to spread out point loads. Foam-cored fiberglass stringers, a pressure-treated wood transom, and exterior-plywood bulkheads support the hull and deck structure. The hull-to-deck joint is bonded with Bostic polyester putty and fastened with self-tapping screws every 6 in. The deck is laminated with chop strand mat wet out with a DCPD resin. A combination of Coremat and end-grain-balsa is used in the deck as coring for added stiffness. Sea Ray takes pains to prevent balsa penetrations.

Hull Design
The Sea Ray 270 Amberjack has a modified-vee, hard-chine planing hull with 21o of deadrise at the transom. Chine flats add form stability at rest and along with the hull's running strakes, add dynamic lift at speed.

Walkthrough
Cockpit and Topside
Aft at the transom area is a full-beam swimplatform with a handrail and integral ski tow eye, along with a 4-step boarding ladder""a long ladder like this is more expensive for the builder, but it makes boarding from the water much easier than a shorter, 3-step ladder would. There's also a storage trunk built into the transom, with plenty of room for lines and fenders as well as the shore power cable and freshwater hookup. Sea Ray put the time and money into providing two pairs of 8-in. stern cleats, which add a lot of mooring versatility and makes it a lot easier to get a fair lead with the stern lines out of the passengers' way. ...

Click here to read the rest of the article at JDPower.com