Sea Ray 270 Amberjack Corcoran CA

The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

Central Valley Mastercraft
(800) 993-7278
Call, eMail or visit the website
Tulare, CA
 
Gene'S Auto & Marine
(310) 530-4363
25297 Normandie Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Pacific Yamaha
(310) 891-6990
1358 Pacific Coast Hwy
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Success Marina
(559) 781-2078
30300 Highway 190
Porterville, CA
Services
Success Marina

Data Provided by:
Copco Lake Store
(530) 459-3655
27734 Copco Rd
Montague, CA
Services
Copco Lake Store

Data Provided by:
Olsons Auto Machine & Marine
(559) 582-0433
110 N Williams St
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Marine View Management
(310) 784-0372
25600 Belle Porte Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Ventura Boat Rentals.Com
(310) 577-6660
Marina Del Rey, CA
Services
Ventura Boat Rentals.Com

Data Provided by:
Pleasure Cove Marina
(707) 966-9600
6100 State Highway 128
Napa, CA
Services
Pleasure Cove Marina

Data Provided by:
Sugarloaf Resort
(530) 238-2711
19671 Lakeshore Dr
Lakehead, CA
Services
Sugarloaf Resort

Data Provided by:
Data Provided by:

Sea Ray 270 Amberjack

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Sea Ray 270 Amberjack, a good-looking multi-function family boat, is a hybrid that works very well for the family that wants to do it all""cruising, fishing, diving and watersports. The comfortable cabin encourages weekends on the water and its excellent handling, generous fuel capacity and a fishing-friendly cockpit offer the versatility and flexibility many boaters are looking for.

Construction
Sea Ray uses a vinylester resin in a 2 oz. layer of chop to prevent osmotic blistering and for its superior strength and impact resistance. Chop and woven roving constitute the laminate and 3mm Coremat is used where bulkheads meet the hull skin to spread out point loads. Foam-cored fiberglass stringers, a pressure-treated wood transom, and exterior-plywood bulkheads support the hull and deck structure. The hull-to-deck joint is bonded with Bostic polyester putty and fastened with self-tapping screws every 6 in. The deck is laminated with chop strand mat wet out with a DCPD resin. A combination of Coremat and end-grain-balsa is used in the deck as coring for added stiffness. Sea Ray takes pains to prevent balsa penetrations.

Hull Design
The Sea Ray 270 Amberjack has a modified-vee, hard-chine planing hull with 21o of deadrise at the transom. Chine flats add form stability at rest and along with the hull's running strakes, add dynamic lift at speed.

Walkthrough
Cockpit and Topside
Aft at the transom area is a full-beam swimplatform with a handrail and integral ski tow eye, along with a 4-step boarding ladder""a long ladder like this is more expensive for the builder, but it makes boarding from the water much easier than a shorter, 3-step ladder would. There's also a storage trunk built into the transom, with plenty of room for lines and fenders as well as the shore power cable and freshwater hookup. Sea Ray put the time and money into providing two pairs of 8-in. stern cleats, which add a lot of mooring versatility and makes it a lot easier to get a fair lead with the stern lines out of the passengers' way. ...

Click here to read the rest of the article at JDPower.com