Sea Ray 185 Sport Clovis CA

The Sea Ray 185 Sport is the builder's second-smallest bowrider offering and is a fine runabout for a first-time boater. It offers all the essentials for a day on the water"a boarding ladder, ski and wakeboard storage, room for sunning, and enough power to get the job done.

A 1 Boat & Jet Ski
(559) 323-9016
2901 E Alluvial Ave
Clovis, CA
Services
A 1 Boat & Jet Ski

Data Provided by:
Pine Flat Lake Marina
(559) 787-2506
P.O. Box 345
Piedra, CA
Services
Houseboat Rentals

Data Provided by:
A Wet & Wild Motorsports
(559) 299-3165
1129 Railroad Avenue
Clovis, CA
 
Grove Boat Lift
(559) 251-5115
Po Box 8095
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

American Recreational Marine
(559) 253-7470
4974 E Clinton Way
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Fiberglass Unlimited
(559) 299-8826
1025 San Jose Avenue
Clovis, CA
 
N & N Boats
(559) 322-9736
1631 Tollhouse Road
Clovis, CA
 
Ron'S Marine
(559) 292-6370
2782 N Sunnyside Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Clovis Marine
(559) 291-5737
2475 N Fordham Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Data Provided by:

Sea Ray 185 Sport

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Sea Ray 185 Sport is the builder's second-smallest bowrider offering and is a fine runabout for a first-time boater. It offers all the essentials for a day on the water"a boarding ladder, ski and wakeboard storage, room for sunning, and enough power to get the job done. Also available is a wakeboard version with tower and towboat features. There's also an outboard-powered version of the 185 with three seating configurations.

Construction
The Sea Ray 185 Sport starts with a gelcoat applied to the mold, followed by a skin coat of chop to help prevent osmotic blistering, then by a solid glass laminate (no coring) in the hull. Pre-formed foam stingers are encapsulated and tabbed to the hull with fiberglass, an excellent structural means of reinforcement. The one-piece cockpit/deck is bonded to the stringers using an adhesive. A shoebox hull-to-deck joint is fastened with self-tapping screws drilled into a high-density composite backing strip. A caulking compound seals the joint. The transom is cored with plywood, and the deck is cored with balsa to add stiffness at light weight.

Hull Design
The 185 Sport has a modified vee bottom with 19° of deadrise at the transom.

Walkthrough
Cockpit
Back aft, a well-designed and generously proportioned molded-in swimplatform with a bolt-on extension provides plenty of room for staging wakeboard and skiing, or for swimming from the boat, and a 3-step ladder is included. The cockpit is built of a one-piece fiberglass liner bonded to the hull, and the upside for the owner is ease of maintenance since there are no cracks or crevices to attract dirt and debris, and squeaks and rattles are eliminated. The Sea Ray 185 Sport has a full-beam bench seat aft and a pair of swivel/sliding seats forward at the helm and to port. Aft over the engine compartment is a sunpad.

Click here to read the rest of the article at JDPower.com