Scout 262 Abaco Walkaround Los Banos CA

The Scout 262 Abaco Walkaround is a single or twin outboard-powered family fishing boat, with comfortable accommodations and an all-business fishing cockpit. It can be used for fishing and cruising offshore, with an added measure of seaworthiness provided by its unsinkable design, high freeboard, self-bailing cockpit, and ability to run fast in moderately rough water.

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Packers Bay Marina Lakehead
(530) 238-2215
16814 Packers Bay Rd
Lakehead, CA
Services
Packers Bay Marina

Data Provided by:
Walnut Grove Marina Inc
(916) 776-1181
1400 Old Levee Rd
Walnut Grove, CA
Services
Walnut Grove Marina Inc

Data Provided by:
Alamar Restaurant & Marina
(916) 922-0200
5999 Garden Hwy
Sacramento, CA
Services
Alamar Restaurant & Marina

Data Provided by:
Mission Bay Kayak Rentals
(858) 488-5598
819 1/2 San Fernando Pl
San Diego, CA
Services
Mission Bay Kayak Rentals

Data Provided by:
Coronado Boat Rentals
(619) 437-1514
1715 Strand Way
Coronado, CA
Services
Coronado Boat Rentals?

Data Provided by:
Folsom Lake Boat Rentals
(916) 223-8129
Folsom Lake State Pk
Granite Bay, CA
Services
Folsom Lake Boat Rentals

Data Provided by:
Orca Yacht Charters Inc
(949) 650-6722
2901 W Coast Hwy # 170
Newport Beach, CA
Services
Orca Yacht Charters Inc

Data Provided by:
Silverthorn Resort-Marina
(530) 275-1571
16250 Silverthorn Rd
Redding, CA
Services
Silverthorn Resort-Marina

Data Provided by:
Paradise Point Marina
(209) 952-1000
8095 Rio Blanco Rd
Stockton, CA
Services
Paradise Point Marina

Data Provided by:
Data Provided by:

Scout 262 Abaco Walkaround

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 262 Abaco Walkaround is a single or twin outboard-powered family fishing boat, with comfortable accommodations and an all-business fishing cockpit. It can be used for fishing and cruising offshore, with an added measure of seaworthiness provided by its unsinkable design, high freeboard, self-bailing cockpit, and ability to run fast in moderately rough water.

Construction
Scout boats are very well built, as well as any in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. Vinylester is preferred, but Scout says that blistering has never been a problem.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which different than a shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive. ...

Click here to read the rest of the article at JDPower.com