Scout 221 Winyah Bay CC Porterville CA

The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well.

Success Marina
(559) 781-2078
30300 Highway 190
Porterville, CA
Services
Success Marina

Data Provided by:
Central Valley Mastercraft
(800) 993-7278
Call, eMail or visit the website
Tulare, CA
 
Sugarloaf Resort
(530) 238-2711
19671 Lakeshore Dr
Lakehead, CA
Services
Sugarloaf Resort

Data Provided by:
California Cruisin' Yacht
(619) 296-8000
1450 Harbor Island Dr
San Diego, CA
Services
California Cruisin' Yacht

Data Provided by:
Harbor Island Yacht Club
(800) 553-7245
1880 Harbor Island Dr
San Diego, CA
Services
Harbor Island Yacht Club

Data Provided by:
The Boat Shop
(559) 781-3000
30311 Avenue 160
Porterville, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Santa Cruz Boat Rentals
(831) 423-1739
15 Municipal Wharf
Santa Cruz, CA
Services
Santa Cruz Boat Rentals

Data Provided by:
Tradewinds Sailing School & Club
(510) 232-7999
1230 Brickyard Cove Rd # 100
Richmond, CA
Services
Tradewinds Sailing School & Club

Data Provided by:
Lake McClure Marinas
(87) 468-7326
3100 Barrett Cove Rd
La Grange, CA
Services
Houseboat Rentals

Data Provided by:
Marina Sailing of San Diego
(619) 221-8286
1551 Shelter Island Dr
San Diego, CA
Services
Marina Sailing of San Diego

Data Provided by:
Data Provided by:

Scout 221 Winyah Bay CC

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well. The boat has a capacity of 7 (or 1100 lbs. of) passengers, and 2,400 lbs. total weight, and is rated for a 300-hp engine.

Construction
Scouts are very well built, as well as any in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. The vinylester route is preferred, but Scout says that blistering has never been a problem, which is what's important in the final analysis.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which is sort of a reverse shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive material.

Click here to read the rest of the article at JDPower.com