Scout 221 Winyah Bay CC Fresno CA

The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well.

A 1 Boat & Jet Ski
(559) 323-9016
2901 E Alluvial Ave
Clovis, CA
Services
A 1 Boat & Jet Ski

Data Provided by:
Hypercycles Of Fresno
(559) 233-1290
1505 N Blackstone Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Action Auto Towing
(559) 498-9999
2822 East California Avenue
Fresno, CA
 
Clawson Motorsports
(559) 435-5020
6334 North Blackstone Avenue
Fresno, CA
 
Bohner Boat & Marine
(559) 431-0336
10740 W North Ave # 41
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Belmont Marine
(559) 237-2597
2006 W Belmont Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Local Photo ADS
(559) 225-2704
1610 East Gettysburg Avenue
Fresno, CA
 
Clovis Marine
(559) 291-5737
2475 N Fordham Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

American Recreational Marine
(559) 253-7470
4974 E Clinton Way
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Data Provided by:

Scout 221 Winyah Bay CC

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well. The boat has a capacity of 7 (or 1100 lbs. of) passengers, and 2,400 lbs. total weight, and is rated for a 300-hp engine.

Construction
Scouts are very well built, as well as any in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. The vinylester route is preferred, but Scout says that blistering has never been a problem, which is what's important in the final analysis.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which is sort of a reverse shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive material.

Click here to read the rest of the article at JDPower.com