Scout 221 Winyah Bay CC Corcoran CA

The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well.

Central Valley Mastercraft
(800) 993-7278
Call, eMail or visit the website
Tulare, CA
 
Marine View Management
(310) 784-0372
25600 Belle Porte Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Pacific Yamaha
(310) 891-6990
1358 Pacific Coast Hwy
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Helgren's Oceanside Sportfish
(760) 722-2133
315 Harbor Dr S
Oceanside, CA
Services
Helgren's Oceanside Sportfish

Data Provided by:
Bidwell Marina-Lake Oroville
(530) 589-3165
801 Bidwell Canyon Rd
Oroville, CA
Services
Bidwell Marina-Lake Oroville

Data Provided by:
Olsons Auto Machine & Marine
(559) 582-0433
110 N Williams St
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Gene'S Auto & Marine
(310) 530-4363
25297 Normandie Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Stardust Sportfishing At Sea
(805) 963-3564
301 W Cabrillo Blvd
Santa Barbara, CA
Services
Stardust Sportfishing At Sea

Data Provided by:
Harbor Island Yacht Club
(800) 553-7245
1880 Harbor Island Dr
San Diego, CA
Services
Harbor Island Yacht Club

Data Provided by:
Davey's Locker Sportfishing and Whale Watch Cruise
(949) 673-1434
400 Main Street
Newport Beach, CA
Services
Davey's Locker Sportfishing and Whale Watch Cruises

Data Provided by:
Data Provided by:

Scout 221 Winyah Bay CC

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well. The boat has a capacity of 7 (or 1100 lbs. of) passengers, and 2,400 lbs. total weight, and is rated for a 300-hp engine.

Construction
Scouts are very well built, as well as any in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. The vinylester route is preferred, but Scout says that blistering has never been a problem, which is what's important in the final analysis.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which is sort of a reverse shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive material.

Click here to read the rest of the article at JDPower.com