Scout 221 Winyah Bay CC Chowchilla CA

The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well.

R J Sales
(559) 674-2142
6306 Road 26 1/2
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Canvas Shop
(559) 439-6660
10724 Highway 41
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Canvas West
(559) 447-9935
10204 Highway 41
Madera, CA
Services
Parts, Aftermarket Accessories, Supplies, Storage

Pacific Marine Center
(559) 432-2277
10452 N. Hwy. 41
Madera, CA
 
Semper Speed & Marine
(559) 436-1888
10854 North Highway 41
Madera, CA
 
Bohner Boat & Marine Inc
(559) 431-0336
10740 Highway 41
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bohner Lacefield Marine
(559) 431-0336
10740 Hwy 41
Madera, CA
Services
New Boat Sales, Used Boat Sales, Engine Repair, Boat Storage
Hours
M-F 830am-530pm; Sat 820am-330pm Sunday - closed

Semper Speed & Marine
(559) 436-1888
10816 Highway 41 # C
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Central Valley Auto Sales
(559) 822-2200
41453 Avenue 14 1/2
Madera, CA
 
Rays Small Engine & Marine
(559) 661-4480
500 N E St
Madera, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Scout 221 Winyah Bay CC

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 221 Winyah Bay Center Console is built for inshore bay fishing, and for short jaunts in open water (weather permitting), but it would be just as well suited to large lakes. It has a moderate deadrise, low freeboard and a low deck that limits seaworthiness, but carries out its inshore mission very well. The boat has a capacity of 7 (or 1100 lbs. of) passengers, and 2,400 lbs. total weight, and is rated for a 300-hp engine.

Construction
Scouts are very well built, as well as any in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. The vinylester route is preferred, but Scout says that blistering has never been a problem, which is what's important in the final analysis.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which is sort of a reverse shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive material.

Click here to read the rest of the article at JDPower.com