Scout 190 Costa Flats Lemoore CA

The Scout 190 Costa Flats is a pure flats boat, with a retractable casting platform in the bow (a little extra height helps put to the lure out further) and a second, higher casting platform in the stern. It has a capacity of 6 (or 1,100 lbs. of) passengers, a 2,000 lb. total capacity, and a maximum rating of 225 hp.

Valley Cycle And Marine
(559) 925-0640
955 S Commerce Ave
Lemoore, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Pacific Yamaha
(310) 891-6990
1358 Pacific Coast Hwy
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Olsons Auto Machine & Marine
(559) 582-0433
110 N Williams St
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bahia Resort Hotel
(858) 488-0551
998 West Mission Bay Drive
San Diego, CA
Services
Bahia Resort Hotel

Data Provided by:
Copco Lake Store
(530) 459-3655
27734 Copco Rd
Montague, CA
Services
Copco Lake Store

Data Provided by:
Gene'S Auto & Marine
(310) 530-4363
25297 Normandie Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Marine View Management
(310) 784-0372
25600 Belle Porte Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Harbor Island Yacht Club
(800) 553-7245
1880 Harbor Island Dr
San Diego, CA
Services
Harbor Island Yacht Club

Data Provided by:
Lake Oroville Marina LLC
(530) 877-2414
3428 Pentz Rd
Paradise, CA
Services
Lake Oroville Marina LLC

Data Provided by:
Packers Bay Marina
(530) 275-5570
4240 Main St
Shasta Lake, CA
Services
Packers Bay Marina

Data Provided by:
Data Provided by:

Scout 190 Costa Flats

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 190 Costa Flats is a pure flats boat, with a retractable casting platform in the bow (a little extra height helps put to the lure out further) and a second, higher casting platform in the stern. It has a capacity of 6 (or 1,100 lbs. of) passengers, a 2,000 lb. total capacity, and a maximum rating of 225 hp.

ConstructionScouts are very well built, as well as any seen in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. The vinylester route is preferred, but many take Scout's word for it that blistering has never been a problem, which is what's important in the final analysis.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which is a sort of reverse shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive.

Click here to read the rest of the article at JDPower.com