Scout 190 Costa Flats Hanford CA

The Scout 190 Costa Flats is a pure flats boat, with a retractable casting platform in the bow (a little extra height helps put to the lure out further) and a second, higher casting platform in the stern. It has a capacity of 6 (or 1,100 lbs. of) passengers, a 2,000 lb. total capacity, and a maximum rating of 225 hp.

Pacific Yamaha
(310) 891-6990
1358 Pacific Coast Hwy
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Gene'S Auto & Marine
(310) 530-4363
25297 Normandie Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Valley Cycle And Marine
(559) 925-0640
955 S Commerce Ave
Lemoore, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Water Resorts Inc
(209) 333-8500
1110 W Kettleman Ln
Lodi, CA
Services
Water Resorts Inc

Data Provided by:
Resort Watersports
(858) 488-2582
3981 Mission Blvd
San Diego, CA
Services
Resort Watersports

Data Provided by:
Marine View Management
(310) 784-0372
25600 Belle Porte Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Olsons Auto Machine & Marine
(559) 582-0433
110 N Williams St
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Central Valley Mastercraft
(800) 993-7278
Call, eMail or visit the website
Tulare, CA
 
Balboa Boat Rentals
(949) 673-7200
510 E Edgewater Ave
Newport Beach, CA
Services
Balboa Boat Rentals

Data Provided by:
Folsom Lake Boat Rentals
(916) 223-8129
Folsom Lake State Pk
Granite Bay, CA
Services
Folsom Lake Boat Rentals

Data Provided by:
Data Provided by:

Scout 190 Costa Flats

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Scout 190 Costa Flats is a pure flats boat, with a retractable casting platform in the bow (a little extra height helps put to the lure out further) and a second, higher casting platform in the stern. It has a capacity of 6 (or 1,100 lbs. of) passengers, a 2,000 lb. total capacity, and a maximum rating of 225 hp.

ConstructionScouts are very well built, as well as any seen in the saltwater fishing industry. They are built entirely of rot-proof fiberglass and composite coring materials""no balsa or any other kind of wood is used structurally. Each Scout starts off with a 3 oz. skin coat of mat wet out in general purpose resin over the gelcoat, followed by fiberglass reinforcements. Many manufacturers use a premium vinylester resin for the skin coat, since it is inherently more resistant to osmotic blistering, but Scout says they have never had a problem with blistering, being very careful to completely wet out the mat with properly catalyzed resin. The vinylester route is preferred, but many take Scout's word for it that blistering has never been a problem, which is what's important in the final analysis.

Divinycell coring is used to stiffen the hull sides, while the bottom is solid fiberglass. A one-piece flanged fiberglass hull support grid is bonded to the hull skin with methacrylate adhesive. One unique characteristic of Scout's design is that the hull stringers continue past the transom to the outboard bracket, so the main hull structure directly absorbs the engine's weight, torque and thrust. Another unique design feature is the hull-to-deck joint, which is a sort of reverse shoe-box joint""the deck fits inside the hull part, and the joint is continuously bonded together using methacrylate adhesive.

Click here to read the rest of the article at JDPower.com