Ranger Z20 Comanche Bass Hanford CA

The Ranger Z20 Comanche is one of four high-end, tournament-level, high-performance bass boats in Ranger's Comanche series. The Ranger is an able performer, with sure handling and capable of speeds to 70 mph.

Marine View Management
(310) 784-0372
25600 Belle Porte Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Olsons Auto Machine & Marine
(559) 582-0433
110 N Williams St
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Valley Cycle And Marine
(559) 925-0640
955 S Commerce Ave
Lemoore, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Pleasure Cove Marina
(707) 966-9600
6100 State Highway 128
Napa, CA
Services
Pleasure Cove Marina

Data Provided by:
CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Gene'S Auto & Marine
(310) 530-4363
25297 Normandie Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Pacific Yamaha
(310) 891-6990
1358 Pacific Coast Hwy
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Central Valley Mastercraft
(800) 993-7278
Call, eMail or visit the website
Tulare, CA
 
Carlsbad Inn Beach Resort
(800) 235-3939
3075 Carlsbad Blvd
Carlsbad, CA
Services
Carlsbad Inn Beach Resort

Data Provided by:
Hopper Boat Rentals
(805) 382-1100
2741 Victoria Ave
Oxnard, CA
Services
Hopper Boat Rentals

Data Provided by:
Data Provided by:

Ranger Z20 Comanche Bass

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Ranger Z20 Comanche is one of four high-end, tournament-level, high-performance bass boats in Ranger's Comanche series. The Ranger is an able performer, with sure handling and capable of speeds to 70 mph. Designed for two anglers to fish comfortably at the same time on fore and aft casting decks, the Z20 is loaded with both storage space and fishing amenities, including a 2-compartment livewell, lockable rod storage and a high-capacity electric trolling motor with generous battery capacity.

Construction
The Ranger Z20 Comanche Bass hull starts off as a layer of gelcoat sprayed over a female mold. This is followed by a 3-oz., resin-rich layer of fiberglass chop that helps to prevent osmotic blistering on the bottom and cosmetic print-through of the fiberglass weave pattern on the hull sides. A series of fiberglass laminates follows to complete the hull skin. The hull is supported by a one-piece fiberglass longitudinal grid that is held precisely in place with a jig and fiberglassed to the hull. Holes are drilled and the hollow stringer system is filled with foam and sealed off""the closed-cell foam used throughout the hull, including inside the hollow stringers, deadens sound, stiffens the structure and makes the boat unsinkable. In fact, all Rangers are unsinkable, with foam used extensively throughout the structure to fill voids and create positive buoyancy even if the hull is damaged. The foam also adds stiffness to the hull skin, and makes the boat quieter, reducing wave noise transmitted through the hull. The transom is made up of multiple layers of fiberglass pultrusions bonded together and stiffened with heavy aluminum structural members. ...

Click here to read the rest of the article at JDPower.com