Ranger Z20 Comanche Bass Fresno CA

The Ranger Z20 Comanche is one of four high-end, tournament-level, high-performance bass boats in Ranger's Comanche series. The Ranger is an able performer, with sure handling and capable of speeds to 70 mph.

A 1 Boat & Jet Ski
(559) 323-9016
2901 E Alluvial Ave
Clovis, CA
Services
A 1 Boat & Jet Ski

Data Provided by:
Belmont Marine
(559) 237-2597
2006 W Belmont Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Local Photo ADS
(559) 225-2704
1610 East Gettysburg Avenue
Fresno, CA
 
Clawson Motorsports
(559) 435-5020
6334 North Blackstone Avenue
Fresno, CA
 
All Weather Canvas
(559) 292-9136
2888 N Sunnyside Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Hypercycles Of Fresno
(559) 233-1290
1505 N Blackstone Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Action Auto Towing
(559) 498-9999
2822 East California Avenue
Fresno, CA
 
Canvas Shop
(559) 439-6660
10724 W North Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Ron'S Marine
(559) 292-6370
2782 N. Sunnyside
Fresno, CA
 
Data Provided by:

Ranger Z20 Comanche Bass

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Ranger Z20 Comanche is one of four high-end, tournament-level, high-performance bass boats in Ranger's Comanche series. The Ranger is an able performer, with sure handling and capable of speeds to 70 mph. Designed for two anglers to fish comfortably at the same time on fore and aft casting decks, the Z20 is loaded with both storage space and fishing amenities, including a 2-compartment livewell, lockable rod storage and a high-capacity electric trolling motor with generous battery capacity.

Construction
The Ranger Z20 Comanche Bass hull starts off as a layer of gelcoat sprayed over a female mold. This is followed by a 3-oz., resin-rich layer of fiberglass chop that helps to prevent osmotic blistering on the bottom and cosmetic print-through of the fiberglass weave pattern on the hull sides. A series of fiberglass laminates follows to complete the hull skin. The hull is supported by a one-piece fiberglass longitudinal grid that is held precisely in place with a jig and fiberglassed to the hull. Holes are drilled and the hollow stringer system is filled with foam and sealed off""the closed-cell foam used throughout the hull, including inside the hollow stringers, deadens sound, stiffens the structure and makes the boat unsinkable. In fact, all Rangers are unsinkable, with foam used extensively throughout the structure to fill voids and create positive buoyancy even if the hull is damaged. The foam also adds stiffness to the hull skin, and makes the boat quieter, reducing wave noise transmitted through the hull. The transom is made up of multiple layers of fiberglass pultrusions bonded together and stiffened with heavy aluminum structural members. ...

Click here to read the rest of the article at JDPower.com