Rain-Sensing Wipers Chowchilla CA

The term "rain-sensing wipers" is commonly used for a system designed to clear the windshield of rain, snow, and debris without driver intervention. The system is programmed to automatically activate and alter the speed and rate of the wiper blades to keep outward visibility unobstructed at all times. A rain-sensing wiper system does not clean the windshield any better than a manual system; it simply monitors outward visibility and automatically activates the wipers.

AutoZone
(559) 665-1460
1633 W Robertson Blvd.
Chowchilla, CA
 
AutoZone
(559) 675-1375
1520 Country Club Dr
Madera, CA
 
AutoZone
(714) 525-3895
102 N Euclid St
Fullerton, CA
 
AutoZone
(951) 296-3973
40345 Winchester Rd
Temecula, CA
 
AutoZone
(559) 781-5823
1245 W. Henderson Ave.
Porterville, CA
 
AutoZone
(559) 674-8198
211 N Gateway Dr
Madera, CA
 
AutoZone
(209) 384-9396
1635 R Street
Merced, CA
 
AutoZone
(707) 206-9807
6595 Commerce Drive
Rohnert Park, CA
 
AutoZone
(559) 562-5767
230 N Highway 65
Lindsay, CA
 
AutoZone
(818) 360-3763
16922 W. Devonshire St
Granada Hills, CA
 

Rain-Sensing Wipers

Provided by:

Click here for more content from JDPower.com

Windshield wipers, which have been standard equipment on most vehicles since 1916, were developed to improve visibility during inclement weather. For nearly 100 years, drivers operated the wipers with manual controls mounted on the dashboard. Today, technology has made possible motorized windshield wipers that automatically recognize a developing visibility problem and clear the glass

before the driver can react to the problem.

The term "rain-sensing wipers" is commonly used for a system designed to clear the windshield of rain, snow, and debris without driver intervention. The system is programmed to automatically activate and alter the speed and rate of the wiper blades to keep outward visibility unobstructed at all times. A rain-sensing wiper system does not clean the windshield any better than a manual system; it simply monitors outward visibility and automatically activates the wipers.

How do they work?
The technology behind rain-sensing wipers is not complicated. A small area of the front windshield glass (usually located on the outside of the vehicle, opposite the rear-view mirror) is monitored by an optical sensor. The sensor is designed to project harmless infrared light at the windshield at an angle and then read the amount of light that is reflected back. A clean windshield will reflect nearly all of the light back, while a wet or dirty windshield will cause the light to scatter. The optical sensor can determine the necessary frequency and speed of the windshield wipers by monitoring the amount of light reflected back into the sensor....

Click here to read the rest of the article at JDPower.com