Grady-White 306 Bimini Center Console Tulare CA

One of Grady-White's largest center consoles, the 306 Bimini Center Console is a big, beefy, great-running offshore sportfisherman. While one can certainly take the family along for a cruise, or even tow boarders and inflatable toys off the stern, the 306 is clearly built to be a serious fishing machine.

Central Valley Mastercraft
(800) 993-7278
Call, eMail or visit the website
Tulare, CA
 
A Sailing Obsession
(559) 901-8075
940 County Center Drive
Visalia, CA
 
Etco Marine
(559) 734-7471
15366 Avenue 296
Visalia, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Sierra Model Yacht Club
(559) 627-0399
1749 E Mary Ave
Visalia, CA
 
Bob`s Service Center
(559) 627-6446
105 North Valley Oaks Drive Suite A
Visalia, CA
 
Blue Water Marine
(559) 738-1631
Visalia, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Han`s Boat Works Inc
(559)739-2628, (559)739-2627
301 West Noble Avenue
Visalia, CA
 
Etco Marine, Inc.
(559) 734-7471
15366 E. Mineral King Avenue
Visalia, CA
 
Honda Motorcycles Authorized Sales & Service
(559) 733-8585
2036 East Mineral King Avenue
Visalia, CA
 
Gene'S Auto & Marine
(310) 530-4363
25297 Normandie Ave
Hanford, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Grady-White 306 Bimini Center Console

Provided by:

Click here for more content from JDPower.com

Model Introduction
One of Grady-White's largest center consoles, the 306 Bimini Center Console is a big, beefy, great-running offshore sportfisherman. While one can certainly take the family along for a cruise, or even tow boarders and inflatable toys off the stern, the 306 is clearly built to be a serious fishing machine. Its excellent running surface makes it a great ride, the unsinkable construction adds an unbeatable safety margin, and it comes with just about anything needed to catch fish.

Construction
The Grady-White 306 Bimini has a solid fiberglass hull bottom and balsa-cored hull sides with a supporting stringer and bulkhead system of pressure treated plywood (which comes with a lifetime warranty) encapsulated in fiberglass. Limberholes are cut through solid glass to prevent water absorption into the core. Plywood is used to core the transom, which is also supported by aluminum bracing, and the decks and the hull-to-deck joints are sealed with a gasket and sealant fastened with a mix of stainless screws and rivets. Foam injected in the voids between the hull and deck liner makes the boat unsinkable.

Hull Design
The hull of the Grady-White 306 Bimini Center Console was designed by C. Raymond Hunt and Associates, and includes a deep entry, and high chines forward produce a smooth headsea ride and transition to approximately 20° of deadrise at the transom. A warped bottom, with deadrise decreasing gradually all the way to the transom (called SeaV2 by Grady-White), produces greater lift aft and a more level ride on plane, resulting in improved propulsion efficiency compared to constant deadrise hulls, as well as improving sightlines ahead from the helm. Chine flats add lift and deflect spray on plane and form stability at rest. ...

Click here to read the rest of the article at JDPower.com