G3 Eagle 175 PF Merced CA

The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features.

McClure Point Marina
(209) 378-2441
3100 Barrett Cove Rd
Snelling, CA
Services
McClure Point Marina

Data Provided by:
Stor-All Mr
(209) 722-8631
2785 North Santa Fe Avenue
Merced, CA
 
Ferriera Racing
(209) 384-9284
819 West 16th Street
Merced, CA
 
Malibu Boats West Inc
(209) 383-7469
1 Malibu Court
Merced, CA
 
M B Sports
(209) 357-4153
280 Airpark Road
Atwater, CA
 
Lake Mc Clure-Lake Mc Swain
(209) 378-2521
9090 Lake Mcclure Rd
Snelling, CA
Services
Lake Mc Clure-Lake Mc Swain

Data Provided by:
International Inboard Marine
(209) 384-2566
2556 W 16Th St
Merced, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Merced Power Sports
(209)722-8055Q
265 West 15th Street
Merced, CA
 
Fine Line Industries
(209) 384-0255
455 Grogan Avenue
Merced, CA
 
Delta Country Houseboats
(916) 776-1741
Walnut Grove, CA
Services
Delta Country Houseboats

Data Provided by:
Data Provided by:

G3 Eagle 175 PF

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features. Specifically designed for the crappie fisherman, the boat includes a baitwell, 2 livewells, lockable rod storage and tackle storage forward. The deck is low in the boat compared to similar fishing boats with raised casting platforms fore and aft, making this 175 PF an especially good choice as a small family boat, or one that will be used by passengers of all ages. The Eagle 175 PF is rated to carry 4 passengers or 1,000 lbs. total passengers, gear and engine.

Construction
The G3 Eagle 175 PF's hull is built of welded .1 in. aluminum with a stamped-in keel and full-length aluminum longitudinals for added hull stiffness, and running strakes in the bottom are added for improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The pressure-treated plywood deck is covered with 18-oz. marine-grade carpeting. Foam is injected between the hull and the deck to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck with the boat on its trailer. The boat has a built-in 13-gal. gas tank and comes with a 12-volt trolling motor in the bow.

The hull is painted with a tough baked-on, 2-part urethane metallic finish that is very resistant to scratching and fading from exposure to sunlight. Color options are Firemetal Red or Gunmetal Blue, and graphics are also available. ...

Click here to read the rest of the article at JDPower.com