G3 Eagle 175 PF Dinuba CA

The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features.

Pine Flat Lake Marina
(559) 787-2506
P.O. Box 345
Piedra, CA
Services
Houseboat Rentals

Data Provided by:
Sierra Model Yacht Club
(559) 627-0399
1749 E Mary Ave
Visalia, CA
 
Blue Water Marine
(559) 738-1631
Visalia, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Han`s Boat Works Inc
(559)739-2628, (559)739-2627
301 West Noble Avenue
Visalia, CA
 
A Sailing Obsession
(559) 901-8075
940 County Center Drive
Visalia, CA
 
Central Valley Polaris
(559) 834-9464
3020 San Antonio Drive
Fowler, CA
 
Etco Marine, Inc.
(559) 734-7471
15366 E. Mineral King Avenue
Visalia, CA
 
Bob`s Service Center
(559) 627-6446
105 North Valley Oaks Drive Suite A
Visalia, CA
 
Central Valley Polaris Fvwr
(559) 834-9464
Fowler, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Honda Motorcycles Authorized Sales & Service
(559) 733-8585
2036 East Mineral King Avenue
Visalia, CA
 
Data Provided by:

G3 Eagle 175 PF

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 Eagle 175 PF, positioned in the middle of the brand's 15- to 19-ft. Eagle modified-vee series of fishing boats, is a rugged, utilitarian sportsman's boat with more than a few civilized features. Specifically designed for the crappie fisherman, the boat includes a baitwell, 2 livewells, lockable rod storage and tackle storage forward. The deck is low in the boat compared to similar fishing boats with raised casting platforms fore and aft, making this 175 PF an especially good choice as a small family boat, or one that will be used by passengers of all ages. The Eagle 175 PF is rated to carry 4 passengers or 1,000 lbs. total passengers, gear and engine.

Construction
The G3 Eagle 175 PF's hull is built of welded .1 in. aluminum with a stamped-in keel and full-length aluminum longitudinals for added hull stiffness, and running strakes in the bottom are added for improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The pressure-treated plywood deck is covered with 18-oz. marine-grade carpeting. Foam is injected between the hull and the deck to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck with the boat on its trailer. The boat has a built-in 13-gal. gas tank and comes with a 12-volt trolling motor in the bow.

The hull is painted with a tough baked-on, 2-part urethane metallic finish that is very resistant to scratching and fading from exposure to sunlight. Color options are Firemetal Red or Gunmetal Blue, and graphics are also available. ...

Click here to read the rest of the article at JDPower.com