G3 1756 SC Panfish Merced CA

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Lake Mc Clure-Lake Mc Swain
(209) 378-2521
9090 Lake Mcclure Rd
Snelling, CA
Services
Lake Mc Clure-Lake Mc Swain

Data Provided by:
International Inboard Marine
(209) 384-2566
2556 W 16Th St
Merced, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Merced Power Sports
(209)722-8055Q
265 West 15th Street
Merced, CA
 
Ferriera Racing
(209) 384-9284
819 West 16th Street
Merced, CA
 
M B Sports
(209) 357-4153
280 Airpark Road
Atwater, CA
 
McClure Point Marina
(209) 378-2441
3100 Barrett Cove Rd
Snelling, CA
Services
McClure Point Marina

Data Provided by:
Stor-All Mr
(209) 722-8631
2785 North Santa Fe Avenue
Merced, CA
 
Fine Line Industries
(209) 384-0255
455 Grogan Avenue
Merced, CA
 
Malibu Boats West Inc
(209) 383-7469
1 Malibu Court
Merced, CA
 
Walnut Grove Marina Inc
(916) 776-1181
1400 Old Levee Rd
Walnut Grove, CA
Services
Walnut Grove Marina Inc

Data Provided by:
Data Provided by:

G3 1756 SC Panfish

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 1756 SC Panfish is a tough little low-maintenance, easy-to-own aluminum boat, designed for no-frills use by sportsmen on protected waters including small lakes and rivers. The boat is popular with a wide variety of hunters and fishermen"deer hunters needing a way to get to favorite hunting spots up river, gator hunters in the Everglades, turkey hunters in the Plains states, and shark fishermen off the coast of Florida. Simple and stoutly built, the 1756 is part of a series of welded aluminum jon boats from 14 to 18 ft.

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Construction
The hull is built of welded .1 in. aluminum with a stamped-in keel for added hull stiffness and improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The aluminum floor has a diamond tread pattern for anti-slip properties, and it's powder coated for durability""one shouldn't ever have to paint this boat for cosmetic reasons. Between the hull and the deck is foam, designed to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck when the boat is on the trailer, or in the water and running at speed. The boat has a built-in gas tank and is pre-wired for a trolling motor in the bow. ...

Click here to read the rest of the article at JDPower.com