G3 1756 SC Panfish Dinuba CA

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Pine Flat Lake Marina
(559) 787-2506
P.O. Box 345
Piedra, CA
Services
Houseboat Rentals

Data Provided by:
Sierra Model Yacht Club
(559) 627-0399
1749 E Mary Ave
Visalia, CA
 
Honda Motorcycles Authorized Sales & Service
(559) 733-8585
2036 East Mineral King Avenue
Visalia, CA
 
Blue Water Marine
(559) 738-1631
Visalia, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Han`s Boat Works Inc
(559)739-2628, (559)739-2627
301 West Noble Avenue
Visalia, CA
 
Etco Marine
(559) 734-7471
15366 Avenue 296
Visalia, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bob`s Service Center
(559) 627-6446
105 North Valley Oaks Drive Suite A
Visalia, CA
 
Etco Marine, Inc.
(559) 734-7471
15366 E. Mineral King Avenue
Visalia, CA
 
Central Valley Polaris
(559) 834-9464
3020 San Antonio Drive
Fowler, CA
 
A Sailing Obsession
(559) 901-8075
940 County Center Drive
Visalia, CA
 
Data Provided by:

G3 1756 SC Panfish

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 1756 SC Panfish is a tough little low-maintenance, easy-to-own aluminum boat, designed for no-frills use by sportsmen on protected waters including small lakes and rivers. The boat is popular with a wide variety of hunters and fishermen"deer hunters needing a way to get to favorite hunting spots up river, gator hunters in the Everglades, turkey hunters in the Plains states, and shark fishermen off the coast of Florida. Simple and stoutly built, the 1756 is part of a series of welded aluminum jon boats from 14 to 18 ft.

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Construction
The hull is built of welded .1 in. aluminum with a stamped-in keel for added hull stiffness and improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The aluminum floor has a diamond tread pattern for anti-slip properties, and it's powder coated for durability""one shouldn't ever have to paint this boat for cosmetic reasons. Between the hull and the deck is foam, designed to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck when the boat is on the trailer, or in the water and running at speed. The boat has a built-in gas tank and is pre-wired for a trolling motor in the bow. ...

Click here to read the rest of the article at JDPower.com