G3 1756 SC Panfish Clovis CA

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

A 1 Boat & Jet Ski
(559) 323-9016
2901 E Alluvial Ave
Clovis, CA
Services
A 1 Boat & Jet Ski

Data Provided by:
Pine Flat Lake Marina
(559) 787-2506
P.O. Box 345
Piedra, CA
Services
Houseboat Rentals

Data Provided by:
A Wet & Wild Motorsports
(559) 299-3165
1129 Railroad Avenue
Clovis, CA
 
Grove Boat Lift
(559) 251-5115
Po Box 8095
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

All Weather Canvas
(559) 292-9136
2888 N Sunnyside Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Fiberglass Unlimited
(559) 299-8826
1025 San Jose Avenue
Clovis, CA
 
N & N Boats
(559) 322-9736
1631 Tollhouse Road
Clovis, CA
 
Clawson Motorsports
(559) 435-5020
6334 North Blackstone Avenue
Fresno, CA
 
Clovis Marine
(559) 291-5737
2475 N Fordham Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Data Provided by:

G3 1756 SC Panfish

Provided by:

Click here for more content from JDPower.com

Model Introduction
The G3 1756 SC Panfish is a tough little low-maintenance, easy-to-own aluminum boat, designed for no-frills use by sportsmen on protected waters including small lakes and rivers. The boat is popular with a wide variety of hunters and fishermen"deer hunters needing a way to get to favorite hunting spots up river, gator hunters in the Everglades, turkey hunters in the Plains states, and shark fishermen off the coast of Florida. Simple and stoutly built, the 1756 is part of a series of welded aluminum jon boats from 14 to 18 ft.

The G3's 1756 SC Panfish is rated for 70 hp and can carry up to 5 passengers or 1,170 lbs. total passengers, motor and cargo. The boat is available as side console (SC) or center console models.

Construction
The hull is built of welded .1 in. aluminum with a stamped-in keel for added hull stiffness and improved tracking. The hull is supported by extruded aluminum ribs and frames with reinforced transom and corner bracing. The aluminum floor has a diamond tread pattern for anti-slip properties, and it's powder coated for durability""one shouldn't ever have to paint this boat for cosmetic reasons. Between the hull and the deck is foam, designed to provide upright floatation in the event the boat is swamped. A transom drain hole with plug helps drain the deck when the boat is on the trailer, or in the water and running at speed. The boat has a built-in gas tank and is pre-wired for a trolling motor in the bow. ...

Click here to read the rest of the article at JDPower.com