Concrete Construction Tools And Services Merced CA

Concrete is not only for tools. It is also used for different services. One you see along the road is the concrete driveways. It should be a minimum of six inches long. In addition, concrete sidewalks should be a minimum of four inches long. Always maintain this four inches grade throughout the sidewalk to prevent it from cracking.

La Salle & Assoc.
2804 Story Ave.
Merced, CA
Building Type
Commercial facilities, Extended care facilities, Financial buildings, Housing - Multi-family, Office buildings
License
California
Membership Organizations
American Institute of Architects

Network Consulting
(888) 526-5644
Livermore, CA
Services
Architects, Computer Software, Computer Network Hardware, Computer Networks

Data Provided by:
3D International
(916) 447-7600
980 9Th Street Suite 2350
Sacramento, CA

Data Provided by:
Professional Communications
(310) 366-3320
20710 Leapwood Avenue # B
Carson, CA
Services
Architects, Computer Network Hardware, Computer Networks, Phone Equipment and Systems Wiring and Installation

Data Provided by:
Gerard Lee Architects
(925) 429-3338
936 Marcella Ct.
Concord, CA

Data Provided by:
S.E.A. Construction Inc.
1941 O'Farrell Street, Suite 101
San Mateo, CA
Services
Remodeler, Designer / Architect, Custom Builder
Membership Organizations
2006 CotY Award, Building Performance Institute, Chrysalis Award, EPA Lead-Safe Certified Firm, National Association of the Remodeling Industry, National Kitchen and Bath Association, Professional Remodeler Best of the Best Design Award, Qualified Remodeler Master Design Award, Qualified Remodeler Top 500, Rebuilding Together, Remodelign Magazine - Remodeling 550

Data Provided by:
Patel Architecture
(760) 776-5031
71711 San Jacinto Dr
Rancho Mirage, CA

Data Provided by:
Mega Builders
(800) 310-6342
20953 Devonshire St. #2
Chatsworth, CA
Services
Mold Remediation, Electrical, Demolition, Concrete Foundations, Bathroom remodeling, Cabinets, Lighting, Painting, Waterproofing, Surveyors & Engineers, Concrete Flatwork, Water Heaters & Tanks, Additions, Home Automation, Landscaping - garden, Multiple Room Renovation, Kitchen remodeling, Disability Alterations, Solar Energy, Tiling, FirePlaces, Decks & Porches, Swimming Pools, Plumbing, Architects & Designers, Disaster Restoration, Framing, Drywall and Plaster, Carpenters, Home Builders, Pl…
Service Types
Residential, Commercial
Company Information
Hours : 8:00 AM to 6:00 PM M,T,W,T,F
Years in Business : 23 Years
Languages Spoken : English, Spanish, Hebrew
Licensing Information
Bonded : Yes
General Liability Insurance : Yes
License # : 623980

Data Provided by:
Luis Costruction
(714) 809-9161
24363 Landover rd
Laguna Hills, CA
Services
Insulation, Architects & Designers, Central Vacuum, Roofing, Commercial Property Maintenance, Paving, Water Heaters & Tanks, Ducts & Vents, Demolition, Locksmiths, Decks & Porches, Closets & Garage Organizers, Water Supply & Wells, Sunrooms, Land Clearing / Bldg Site Prep, Gutters, Appliance installation, FirePlaces, Central Heating System, Home Builders, Mold Remediation, Inspection Services, Disability Alterations, Handyman, Basement remodeling, Mobile Homes, Sewer & Septic, Surveyors & Eng…
Service Types
Residential, Commercial, Emergency Services
Company Information
Hours : 6:00 AM to 8:00 PM M,T,W,T,F,S,S
Years in Business : 11 Years
Languages Spoken : English, Spanish
Licensing Information
Bonded : Yes
General Liability Insurance : Yes
License # : B.915705

Data Provided by:
Jackson Design & Remodeling, Inc.
4797 Mercury St
San Diego, CA
Service Type
Designer / Architect, Remodeler
Membership Organizations
2007 CotY Award, 2007 Master Design Award, 2008 CotY Awards, 2009 CotY Awards, American Society of Interior Designers, Angie's List, Better Business Bureau, Build It Green, Chrysalis Award, National Association of the Remodeling Industry, National Kitchen and Bath Association, Qualified Remodeler Master Design Award, Qualified Remodeler Top 500, Rotary International
Awards
2007 Guildmaster with Distinction, 2008 Guildmaster with Highest Distinction, 2009 Guildmaster with Highest Distinction, 2010 Guildmaster with Highest Distinction

Data Provided by:
Data Provided by:

Concrete Construction Tools And Services

The diversity of high risk activity is present in buildings and construction industries. To prevent deaths, injuries and illness, the hazard that construction people are facing must be managed.

The construction industry employs skilled workers who build various infrastructures or buildings. Their work includes erection, construction, extension and structural alteration.

Other construction services include:

Site preparation
Excavation and landscaping work done in connection with construction work.
Installation or assembly of pre fabricated components used in construction work
Separation of a structure or part of a structure into its pre fabricated components


Demolition work or asbestos removal work

In almost all of the above services, concrete is used in one way or another. Appropriate tools and equipment must be utilized when concrete. Here are different kinds of tools and equipment used for working with concrete:

1.AIR CONCRETE CHAIN SAW WITH DIAMOND CHAIN 11” BAR AND CHAIN
Category: Concrete Chain Saws

•Cut with speed, portability and ease through Reinforced Brick, Concrete, Block, Natural Stone and Concrete Pipe.
•Designed for cutting through walls, floors and columns in a single pass

2.DRY DIAMOND CORE DRILLING MACHINE – One Speed
Category: Core Drills

•Lightweight and compact core drill for holes that are up to approximately 3 1/4” in limestone, brick, cinder blocks as well as other types of abrasive materials
•The slip clutch is used to protect the operator in case of jamming.

3.HIGH SPEED GENERAL PURPOSE BLADES (Cured Concrete)

•Designed for contractors using a hand held, high speed saw
•For general construction and other emergency style sawing of concrete.
•Can be wet or dry

4.AIR ROTARY HAMMER DRILLS – SDS PLUS
Category: Hammer Drills

•1” BIT capacity for drilling concrete and masonry uses SDS – Plus
•Shank drill bits holes up to 1” diameter with solid carbide tipped bits
•Up to 3” diameter with carbide core bits

5.ALUMINUM HAND HELD GROOVER (12”)
Category: Czar Weld Hand Tools

•1/8” 6061 aircraft aluminum lightweight only 2 lbs. float size.
•8” x 12” blade size 7 ½” x 1 1/8” deep x 3/8” radius replaceable blade float size provides wider flatter surface area.
paint, glue, tile cement, drywall. mud and other materials in small. batches up to 50 lbs

6.MIXER HER 14.1S with VARIABLE SPEED – The lightweight mixer with high torque

•Excellent for use by painters, tillers and contractors for mixing paint, tile cement, glue, drywall mud and other material in small quantities of up to 50 lbs.

7.TIGER EQUIPMENT FLOOR SAW MINI 1
Category: Saws

•The Sturdi Saws are the most durable and easily maintained push saws available.

8.8” HEAVY DUTY FLOOR SCRAPER WITH 5 FOOT ERGONOMIC HANDLE PLUS 20 8” SPARE BLADES
Category: Surface Prep Tools

•Heavy duty head with 4 screws
•Head is cast and heat treated, carbon steel
•General large area clean up
•Head fits all other handles
•EZ to use large rub

9.BOX OF 100 BLADES – 4 inches
Category: Surface Prep Tools

•for use with HS 0105, HS0125, HS 0125ERG, 4” Scrapers

10. HC 175 – 5 HIGH CYCLE VIBRATOR WITH 1 ¾” HEAD
Category: High Cycle Vibrators and Generators

•Bearing less air motor in head vibrators
•1 ¾” head with 5' handling hose and 25' switch and cable assembly.
Here are more concrete construction tools:
•Concrete Tamp – used to compress the concrete mix.
•Bull float – used to level the exterior of concrete, sealing tangible from moisture lose.
•Fresno – are intended for adding long extension handles so they don't have to walk out on the slab. They fast work over big areas but do not attain the same degree of compaction.
•Floats – level ridges, fill voids, and smooth the surface in preparation for troweling. Floats can also be applied to work in dry shake color hardeners. A float pastes on the surface by means of pushing down the coarse aggregate.
•Walking Edger Tool – forms the edges of concrete to a smooth rounded edge.
•Jointer Tool (also called as Grover) – used to section concrete to control from cracking.
•Magnesium Floats Tool – level concrete to accessible concrete and forms.
•Steel Trowel Tool – used to smooth and seal concrete to a polished finish.
•Straight edges – strike off freshly placed concrete and make it as level as possible before finishing.
•Concrete Broom – used to uniform the concrete onto a non slip textured exterior.
•Concrete Boots and Gloves – defense from harsh elements.

Concrete is not only for tools. It is also used for different services. One you see along the road is the concrete driveways. It should be a minimum of six inches long. In addition, concrete sidewalks should be a minimum of four inches long. Always maintain this four inches grade throughout the sidewalk to prevent it from cracking.

For more information on Concrete Tools please visit our website http://www.concrete-tools.net



Provided by ZingArticles.com