Cobalt 222 Bowrider Fresno CA

The Cobalt 222 Bowrider has a number of features designed to meet ever-evolving customer tastes (stainless-trimmed rubber foot rests and push button switches) and needs (lots of storage and cooler capacity under the deck and inside the forward consoles).

A 1 Boat & Jet Ski
(559) 323-9016
2901 E Alluvial Ave
Clovis, CA
Services
A 1 Boat & Jet Ski

Data Provided by:
Hypercycles Of Fresno
(559) 233-1290
1505 N Blackstone Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Action Auto Towing
(559) 498-9999
2822 East California Avenue
Fresno, CA
 
Clawson Motorsports
(559) 435-5020
6334 North Blackstone Avenue
Fresno, CA
 
Gregor Boat CO
(559) 441-7703
2316 East Annadale Avenue
Fresno, CA
 
CMS Toys LLC
(559) 255-6592
5290 Millerton Rd
Friant, CA
Services
CMS Toys LLC

Data Provided by:
Belmont Marine
(559) 237-2597
2006 W Belmont Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Local Photo ADS
(559) 225-2704
1610 East Gettysburg Avenue
Fresno, CA
 
All Weather Canvas
(559) 292-9136
2888 N Sunnyside Ave
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Bohner Boat & Marine
(559) 431-0336
10740 W North Ave # 41
Fresno, CA
Services
Parts, Service, Aftermarket Accessories, Trailers, Supplies, Storage

Data Provided by:

Cobalt 222 Bowrider

Provided by:

Click here for more content from JDPower.com

Model Introduction
The Cobalt 222 Bowrider has a number of features designed to meet ever-evolving customer tastes (stainless-trimmed rubber foot rests and push button switches) and needs (lots of storage and cooler capacity under the deck and inside the forward consoles). For loyal Cobalt aficionados, the 222 replaces the 226, with the new boat adding a little freeboard, which results in a higher cockpit coaming (it's a full 32 in. deep inside) and more internal volume for all that storage capacity.

The Cobalt 222 Bowrider is the third smallest bowrider (there are also 20- and 21-ft. models) in the builder's lineup, however, the same basic components and construction materials go into the 222 as in Cobalt's larger models. A high quality, thoughtfully designed boat, it serves as a good introduction to the line. The boat is rated for 12 passengers or a total of 1,800 lbs. of passengers and gear.

Construction
After the gelcoat is sprayed on the mold, a vinylester-based Zycon barrier coat that's about the same thickness as the gelcoat (22 mils.) goes on the bottom (to protect against blistering) and the sides (to reduce print through). The bottom is a solid fiberglass laminate, while SprayCore (80 mils.) is used on the sides to further prevent print through. The hull is supported by a network or high-hat hollow stringers that are flanged and bonded to the hull with an extremely strong adhesive. Marine-grade plywood bulkheads are tabbed to the hull and the stringers. The single-piece deck liner goes on next, attached to the hull with a shoebox joint, with stainless steel self-tapping screws at every foot into a strip of pressure-treated plywood. Two more rows of screws follow, securing on the rubrail and stainless insert. ...

Click here to read the rest of the article at JDPower.com